Characteristics: The Accelerator Plus is a curing accelerator which is especially designed for the use with our Schwanheimer Adhesives. In combination with our Industrial Adhesive, the accelerator enables rapid and transparent bondings of very small and/or not accurately fitting surfaces on which you cannot apply high pressure. Perfectly suitable for bondings of open-cell and highly absorbent materials, like wood, porcelain, leather, ceramic, clay, marble, etc. Using the accelerator increases the tensile and shearing force, which is already achieved with our adhesive, by another 30%.Application: Apply the Accelerator with the integrated brush on one surface. After a reaction time of at least 20 seconds, apply our industrial adhesive on the other surface and join the parts together. The adhesive gets cure directly after contact with the accelerator!Advice: Depending on the application, you can apply the activator Plus, for example, on one side, assemble the parts without adhesive and then the adhesive using the micro-capillary (fine dosing tip) can run into the break.Shelf life: No expiry date. Store in a dark place.Our Schwanheimer Accelerator Plus is available in different sizes: 10ml, 0,5L and 1L. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de     DownloadsSafety data sheet Aktivator plus