Characteristics: Color: transparent, single-component adhesive, medium viscosity, bridges small tolerances and unevenness, for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de     DownloadsSafety data sheet Nr 300Technical data sheet Nr 300

Characteristics: Color: transparent, single-component adhesive, medium viscosity, bridges small tolerances and unevenness, for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 300Technical data sheet Nr 300

Characteristics: Color: transparent, single-component adhesive, high viscosity, bridges tolerances and unevenness (max.0,2mm), for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-50 / +80°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 500Technical data sheet Nr 500

Characteristics: Color: transparent, single-component adhesive, high viscosity, bridges tolerances and unevenness (max.0,2mm), for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-50 / +80°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 500Technical data sheet Nr 500