Characteristics: Color: transparent, single-component adhesive, low viscosity, easy handling, rapid hardening, high final strength, clean and transparent bonding. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with the micro tip (fine dosing tip) or candle wax. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 12 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de   DownloadsSafety data sheet Nr 100Technical data sheet Nr 100

Characteristics: Color: transparent, single-component adhesive, low viscosity, easy handling, rapid hardening, high final strength, clean and transparent bonding. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with the micro tip (fine dosing tip) or candle wax. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 12 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de       DownloadsSafety data sheet Nr 100Technical data sheet Nr 100

Characteristics: Color: transparent, single-component adhesive, low viscosity, easy handling, rapid hardening, high final strength, clean and transparent bonding. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with the micro tip (fine dosing tip) or candle wax. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 12 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de   DownloadsSafety data sheet Nr 100Technical data sheet Nr 100

Characteristics: Color: transparent, single-component adhesive, medium viscosity, bridges small tolerances and unevenness, for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de     DownloadsSafety data sheet Nr 300Technical data sheet Nr 300

Characteristics: Color: transparent, single-component adhesive, medium viscosity, bridges small tolerances and unevenness, for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-55 / +95°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 300Technical data sheet Nr 300

Characteristics: Color: transparent, single-component adhesive, high viscosity, bridges tolerances and unevenness (max.0,2mm), for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-50 / +80°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 500Technical data sheet Nr 500

Characteristics: Color: transparent, single-component adhesive, high viscosity, bridges tolerances and unevenness (max.0,2mm), for open-cell and absorbent materials such as wood, cork, leather, artificial leather, felt, ceramic, natural colored earthenware, gypsum, foam rubber, paperboard, etc. Can easily balance out slight unevenness and tolerances. Can be adjusted for a higher length of time because of its higher viscosity. The bonded joints are extensively waterproof, temperature (-50 / +80°C), humidity and chemical resistant.Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de DownloadsSafety data sheet Nr 500Technical data sheet Nr 500

Characteristics: Color: transparent, single-component, high viscosity, suitable for dynamic-and temperature-stressed bonds, for materials of different expansion due to the high impact resistance for various rubber materials, plastics and metal with plastic connections flexible, slower and elastic hardening, longer corrigibility due to the higher viscosity. Temperature resistance: -55 / + 140 ° C   Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by strong pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Advice: Very high final strength in combination with our Primer Plus in case of PP, PE and PTFE bondings. Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de     DownloadsSafety data sheet RE HT opacTechnical data sheet RE HT opac

Characteristics: Color: transparent, single-component, high viscosity, suitable for dynamic-and temperature-stressed bonds, for materials of different expansion due to the high impact resistance for various rubber materials, plastics and metal with plastic connections flexible, slower and elastic hardening, longer corrigibility due to the higher viscosity. Temperature resistance: -55 / + 140 ° C Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by strong pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Advice: Very high final strength in combination with our Primer Plus in case of PP, PE and PTFE bondings. Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de     DownloadsSafety data sheet RE HT opacTechnical data sheet RE HT opac

Characteristics: Color: Black, single-component, high viscosity, suitable for dynamic-and temperature-stressed bonds, for materials of different expansion due to the high impact resistance for various rubber materials, plastics and metal with plastic connections flexible, slower and elastic hardening, longer corrigibility due to the higher viscosity. Temperature resistance: -55 / + 140 ° C Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by strong pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Advice: Very high final strength in combination with our Primer Plus in case of PP, PE and PTFE bondings. Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de     DownloadsSafety data sheet RE HT blackTechnical data sheet RE HT black

Characteristics: Color: Black, single-component, high viscosity, suitable for dynamic-and temperature-stressed bonds, for materials of different expansion due to the high impact resistance for various rubber materials, plastics and metal with plastic connections flexible, slower and elastic hardening, longer corrigibility due to the higher viscosity. Temperature resistance: -55 / + 140 ° C Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or one of our cleaners!). Apply the adhesive sparingly in dots or lines on one of the surfaces. The adhesion is initiated by strong pressing the parts together (contact pressure/deoxygenation). Without pressure the parts can be moved for a few seconds. Do not move or stress the parts for some minutes. The final strength depends on the material. It is recommended to test the bonding before use.Advice: Very high final strength in combination with our Primer Plus in case of PP, PE and PTFE bondings. Opening, dosing and storage: Cut the bottle tip at the notch. For storage, reseale the dispensing tip with candle wax or a new bottle tip. Protect the adhesives from direct sunlight or heat radiation.Shelf life: At least 9 months; but can be extended if kept in a cool place (refrigerator). Our Schwanheimer Industrial Adhesives are available in different sizes: 10g, 20g, 50g, 0,5kg and 1kg. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de     DownloadsSafety data sheet RE HT blackTechnical data sheet RE HT black

Characteristics: Suitable for all heavily impacted bonding of glass / acrylic on glass, glass / acrylic to metal etc. Schwanheimer’s new generation of UV curing adhesives is based on the Acrylic technology. The optimal wave length is at 395 nm. Purposely we go in between the UVA and visible light section. On the one side this allows the light to shine through transparent but UV light absorbing plastics. On the other side the shelf life of the adhesive is not critical.   The bonded joints are extensively waterproof, temperature (-30 / +120°C), humidity and chemical resistant.   Application: The accurately fitting surfaces of the parts you want to join must be dry and free from rust, grease, dust and other adhesives (we recommend to clean the surfaces before the application with ACETONE or our Spraycleaner!). Apply the adhesive sparingly on one of the surfaces. The UV adhesive is completely harden (min. 5 minutes) by UV light! Schwanheimer UV adhesive cure really effective with our UV-flash light (depending on the surface up to 1 minute). For the series production we offer fully automated spot and flood lamps. More information on request.   Shelf life: At least 12 months; should be stored in a dark place.   Our Schwanheimer UV Adhesive is available in 20g. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de   DownloadsSafety data sheet UV KleberTechnical data sheet UV Kleber

Characteristics: With defined UV rays. Ideally suited for optimal curing of our UV Adhesive.   Application: The adhesive spotlight several seconds depending on the area size. By defined light spectrum the adhesive cures very quickly and cleanly.   Note: Delivery does not include batteries. 3x1,5V batteries reqired.   More Informations and pricelists with graduation (season prices from 6 pieces per product) on request.   Schwanheimer Industriekleber GmbH Kurzgewann 3 D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461 Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de    

Characteristics: Schwanheimer Lock Seal Gel is a single component, solvent-free adhesives that cure in the absence of atmospheric oxygen and simultaneous catalytic influence of metal to a high molecular weight crosslinked plastic. They brace themself doing in the surfaces of the parts to be joined. Schwanheimer Lock Seal Gel prevents corrosion and makes form-fitting, impact and vibration resistant compounds, which are all conventional mechanical fasteners far superior.   Application: Apply Schwanheimer Lock Seal Gel on one of the surfaces. Join the parts together / turn the screw into the thread and let it harden. There is achieved a breakaway torque of about 30Nm (DIN 54454).      First innovation – the product      1 adhesive for 4 applications   Advantages unique, thixotroph formulation for all-purpose repairs 1 single Product reduces: the complexity of the product, the inventory cost, the danger of using the wrong product in error Second innovation –  the package  Pump Gel Dispenser   Advantages high quality Made in Europe almost 100 per cent complete drain 100 per cent plastic, easy to recycle very exact dosing, adjustment via finger press neat fastening, no dirtying of the toolbag Shelf life: At least 24 months; but can be extended if kept in a dark place.Our Schwanheimer Lock-Seal Gel is available in the size: 35g. Informations about other sizes, data sheet and pricelists with graduation (graduated prices from 6 pieces per product) on request. Schwanheimer Industriekleber GmbHKurzgewann 3D-69436 SchwanheimTelefon: +49(0)6262-3431 + 5461Fax:      +49(0)6262-2406E-Mail:   info@schwanheimer-industriekleber.de DownloadsSafety data sheet Lock Seal GelTechnical data sheet Lock Seal Gel